We are still open. Please click here to read our full COVID-19 update.

Plasma Cutters

This catalog has no sub-catalogs.

Technical ARC PLASMA 56i Plasma Cutting Machine - Single Phase

Product code: BQUCGEI38A

 

PLASMA 56i 

 

Important notice; Many small inverter plasma machines on the market today do not comply with BS EN standards, these can be unsafe to use & possibly lethal. We strongly suggest you take great care before purchasing a plasma cutter. The AWD has recently issued a industry safety warning regarding this.

TECARC plasma cutters like all our machines have always complied with current standards.

Up to 25mm cutting on single phase

These robust plasma cutters are the ideal machine for cutting all metals for fabrication & maintenance. These models give a fast really clean cut on virtually all metals. We fit Trafimet cutting torches which perform superbly & have no expensive consumable parts keeping your consumable costs very low. This combined with the high electrical efficiency ensures your overall running costs are kept to an absolute minimum, in fact we are confident these models cost less to run than any other machine on the market today. 

These machines are generator friendly.

Built to comply with BS EN 60974-1, CE marked, RoHS compliant and WEEE registered so you can be sure of the safety & quality.

We guarantee to fully support these models with spares & service for a minimum of 10 years.

The best back up in the industry!

Standard functions & features

  • Pilot arc to give the best starting & assist with cutting on painted metals or mesh or rusty materials.
  • Infinitely variable output current from 20A up to machines max output.
  • High duty cycle to cope with heavy cutting applications.
  • High efficiency so uses less electric than many other machines.
  • Fail safe low pressure switch to shut machine down if air supply drops too low.
  • Easy to operate with a no fuss approach to the controls so you can simply plug in and cut.
  • These models are fitted with an air regulator with built in filter and water trap and an accurate pressure gauge
  • Fitted with Trafimet torches which use very common low cost torch consumables (very economical to run).
  • All models have the plasma torch fitted internally for very high safety.
  • 76iSP model has a digital meter to display cutting current.
Technical Spec
Plasma 56i
Mains input voltage
230V
Input fuse
16A
Generator minimum size
6KVA
Output current
20-50A variable
Duty cycle
50A @ 40%
Size approx
450Lx360Hx210W
Weight approx
14Kg
Cutting torch
6M CB50
Max severance cut
17mm
Max recom cut (M. steel)
12mm
Max recom cut (stainless/ali)
9mm

*When using with a 13A fuse on the higher settings the fuse may blow occasionally.

Technical ARC PLASMA 56i Plasma Cutting Machine - Single Phase
Free delivery

Free delivery

We deliver to mainland UK free of charge.

Buying advice

Impartial buying advice

Speak to a trained technitian on 01993 882 832.

Logo slider